Skupina Endress+Hauser

Mediální centrum

Akce

Vaše kariéra s Endress+Hauser

Naše podpora pro vás

E-direct Shop

E-direct výrobky: jednoduchý výběr, vysoká kvalita, online objednávka. Tyto výrobky nabízejí základní funkce, které potřebujete pro cenově efektivní řešení Vaší aplikace.

E-direct Shop

Certified Training for PROFIBUS Installer

A hands-on based course, recognized in all industries

With the help of actual hands-on tasks you will learn how PROFIBUS fieldbus networks are installed in detail. The emphasis is on the correct installation and usage of tools.

Podrobnosti

Místo konáníNákladyRegistrace
25.04.2017 - 26.04.2017 Reinach Switzerland 850 CHF Přihlášení

Obsah

  • In the theoretical part the following content is covered:
    PROFIBUS organization, overview PROFIBUS DP/PA, DP connector installation guideline, Fieldbus cable, DP and PA components.

  • Cable routing, grounding and shielding, termination, device addressing, assembly acceptance, PROFIBUS tools, measurements on the physical layer of PROFIBUS DP/PA.

  • In the practical part the following content is covered:
    Wiring of a DP/PA bus segment, how to measure a signal, what is a good or bad signal, external influences on the bus cable, good cabling practices.

  • Simulation of electromagnetic interference, measuring with a handheld oscilloscope, use of diverse tools on the market, steps to a well-functioning PROFIBUS network.

Cíle

  • At the end of the course you will be able to install new PROFIBUS networks and avoid typical installation mistakes on the physical layer of PROFIBUS DP and PROFIBUS PA segments.

  • You will also understand the benefits of the technology and know how to use the installation tools available on the market today.

Kdo by se měl zúčastnit?

  • Technicians/Maintenance Technicians

  • Service/Support Specialists

Předpoklady

Basic knowledge of electronics and ability to use a computer.

Kvalifikace

The training is internationally recognized and certified by the PROFIBUS organization.

Způsob hodnocení

Participants are given time to work with the various components of a PROFIBUS network.
We put emphasis on a balanced approach to theory and practice as well as a vendor-neutral atmosphere.
Mornings are spent learning the theoretical background and afternoons with the actual components and integration of the field devices into the system.
Almost half the course is spent on giving you ample opportunity to use what you have learned in hands-on tasks taken straight from our experience.

Typ

A hands-on based course, recognized in all industries

Kontakt

Endress+Hauser Czech s.r.o.
Olbrachtova 2006/9 140 00 Praha 4 Czech Republic
Tel.: +420 241 080 450
Fax: +420 241 080 460
Odeslat e-mail www.cz.endress.com
Online nástroje