Products for liquid analysis - Sum parameters
TOCII CA72TOC
High-temperature TOC analyzer
-
Industrial applications with varying pH values and high salt loads
-
High accuracy, low maintenance
- Measuring time only 7 minutes
- Measuring range:
0.25 - 12,000 mg/l,
can be extended optionally
Více informací o CA72TOC
EZ-TOC II CA52TOC
Continuous real-time wet-chemical TOC analyzer
-
Monitoring of organic carbon in water/wastewater, industrial processes, methanol dosage
- UV-supported chemical low temperature oxidation
- Various measuring ranges:
0 - 10,000 mg/l TOC, measurements down to 15 ppb - Effective self monitoring - follows ISO and EPA approved methods
Více informací o CA52TOC
STIP-scan CAS74
In-situ analyzer for 9 parameters
-
UV/VIS spectroscopic system for nitrate, COD, BOD, TOC, SAC, SS, SV, SI and turbidity
-
Various measuring ranges depending on parameter
-
No chemicals or reagents required
-
Self-cleaning and low maintenance
Více informací o CAS74
STIP-scan CAM74
Transmitter for measuring of 9 parameters
-
UV/VIS spectroscopic system for nitrate, COD, BOD, TOC, SAC, SS, SV, SI and turbidity
-
Various measuring ranges depending on parameter
-
No chemicals or reagents required
-
Self-cleaning and low maintenance
Více informací o CAM74
Stamosens CSS70 / CSM750
In-situ analysis system for SAC
- Wastewater
- Sensor and transmitter for dissolved organic substances
- Various measuring ranges:
0.3 … 50 1/m up to 15 … 700 1/m - Economy-priced and ecological measuring process: no chemicals required
Více informací o CSM750
BIOX-1010
Continuous short-time BOD analyzer
- Load control, monitoring of limit value, discharge or production loss, airport wastewater
- Various measuring ranges:
5 … 1,200 mg/l BOD up to
20 …100,000 mg/l BOD - Response time 3 minutes, reagent-free measurement
PHOENIX-1010
Continuous short-time COD analyzer
- Control of inlet, outlet, industrial discharge, raw wastewater
- Uses ozone for oxidation
- Various measuring ranges:
10 - 100,000 mg/l COD - Response time 3 to 15 minutes