Oblast použití
Flowfit COA30 is an efficient tool for calibrating your oxygen sensors. It ensures precise results and can be flexibly adapted to different measurement requirements. Thanks to its compact design, it is quickly ready for use anywhere, supporting reliable operations.
Flowfit COA30 is used wherever precise and efficient calibration of oxygen sensors is required.
The PMMA version of Flowfit COA30 is suitable for liquids and enables manual oxygen measurements directly at the process – even without an installed measuring point. Where measuring points exist, calibration with Flowfit COA30 is easier since the sensor need not be removed. Flowfit COA30 is used in various applications, such as:
Power & Energy:
- Water and steam cycles
Life Sciences:
- Fermentation processes
Food & Beverage:
- Preparation
- Filling
- Storage
Chemical:
- Inertization
Výhody
Precise calibration of your oxygen sensors with test gases: Flowfit COA30 enables precise calibration of your oxygen sensors, perfectly tailored to the requirements of the respective measuring point.
Easy calibration of oxygen sensors with different sensor lengths from 120 mm to 420 mm: Install the sensor in the flow cell, connect it to the transmitter, attach the appropriate test gas, calibrate – done.
With Flowfit COA30, you save significant time during zero-point calibration and avoid additional cleaning. Calibration is performed using test gases such as nitrogen – completely residue-free and effortless.
Flexible oxygen measurement directly at the process – even without a fixed measuring point (only with the PMMA version)
Maximum efficiency: calibration of the measuring point in the process without removing the installed sensor (only with the PMMA version)
-
Jednoduché produkty
- Jednoduchý výběr, instalace i provoz
Technická výkonnost
Jednoduchost
-
Standardní produkty
- Spolehlivé, robustní a nenáročné na údržbu
Technická výkonnost
Jednoduchost
-
Špičkové produkty
- Vysoce funkční a přesto jednoduché
Technická výkonnost
Jednoduchost
-
Specializované produkty
- Navrženo pro těžké aplikace
Technická výkonnost
Jednoduchost
Dle konkrétního produktu
| Výběr produktů FLEX | Technická výkonnost | Jednoduchost |
|---|---|---|
Výběr produktů z řady Fundamental Pro jednoduché aplikace |
Technická výkonnost
|
Jednoduchost
|
Výběr produktů z řady Lean Efektivně pokrývejte běžné procesní požadavky |
Technická výkonnost
|
Jednoduchost
|
Výběr produktů z řady Extended Optimalizujte své procesy inovativními technologiemi |
Technická výkonnost
|
Jednoduchost
|
Výběr produktů z řady Xpert Zvládněte i ty nejtěžší aplikace |
Technická výkonnost
|
Jednoduchost
Dle konkrétního produktu |
-
-
Technické informace (TI)
TI Flowfit COA30
Flow cell for calibrating oxygen sensors with a length of 120 to 420 mm and a diameter of 12 mm
EN CS 09/01/2026Jazyk:
English
Verze:
09/01/2026
Velikost souboru:
1.2 MB
Název souboru:
TI01876CEN_0125-00.pdf
-
-
-
Technické informace (TI)
TI Flowfit COA30
Flow cell for calibrating oxygen sensors with a length of 120 to 360 mm and a diameter of 12 mm
EN CS 23/05/2025Jazyk:
English
Verze:
23/05/2025
Velikost souboru:
1 MB
Název souboru:
TI01824CEN_0125-00.pdf
-
-
-
Návod k obsluze (BA)
BA Flowfit COA30
Průtoková cela pro kalibraci kyslíkových senzorů o délce 120 až 360 mm a průměru 12 mm
EN CS 23/05/2025Jazyk:
Czech
Verze:
23/05/2025
Velikost souboru:
1.7 MB
Název souboru:
BA02485CCS_0125-00.pdf
-
-
-
Návod k obsluze (BA)
BA Flowfit COA30
Průtoková cela pro kalibraci kyslíkových senzorů o délce 120 až 420 mm a průměru 12 mm
EN CS 14/01/202604/12/2025Jazyk:
Czech
Verze:
14/01/2026
Velikost souboru:
1.9 MB
Název souboru:
BA02583CCS_0226-00.pdf
-
-
-
Návod k instalaci (EA)
EA Flowfit COA30
For the maintenance of the COA30 assembly
EN CS 05/06/2025Jazyk:
English
Verze:
05/06/2025
Velikost souboru:
589.7 KB
Název souboru:
EA01607CEN_0125-00.pdf
-
-
-
Návod k instalaci (EA)
EA Flowfit COA30
For replacing the seal of the COA30
EN CS 06/06/2025Jazyk:
English
Verze:
06/06/2025
Velikost souboru:
721.8 KB
Název souboru:
EA01608CEN_0125-00.pdf
-
-
-
Prohlášení výrobce
Product family: Flowfit
Product root: COA30-
Declaration number: HE_02055_01.25
Manufacturer specification: PEDEN CS 22/04/2025Jazyk:
English
Verze:
22/04/2025
Velikost souboru:
264.6 KB
Název souboru:
HE_02055_01.25 COA30_11_DGRL_.pdf
-
-
-
Prohlášení výrobce
Product family: Flowfit
Product root: COA30-
Declaration number: HE_02066_01.25
Manufacturer specification: PEDEN CS 22/04/2025Jazyk:
English
Verze:
22/04/2025
Velikost souboru:
265.5 KB
Název souboru:
HE_02066_01.25 COA30_12_DGRL_.pdf
-
-
-
Prohlášení výrobce
Product family: Flowfit
Product root: COA30-
Declaration number: HE_02166_01.25
Manufacturer specification: RoHSJazyk:
German
Verze:
23/06/2025
Velikost souboru:
262.6 KB
Název souboru:
HE_02166_01.25_COA30.pdf
-
-
-
List komponentů
CS for Flowfit COA30
Components Sheet for COA30-*CA* Hose Connection
Jazyk:
English
Verze:
12/09/2025
Velikost souboru:
183.3 KB
Název souboru:
Components_Sheet_71685366_COA30-CA_Hose_Connection_COA30.pdf
-